Mold & Mildew Cleanup in Gibsonton, FL

Gibsonton's moisture picture

Gibsonton sits where the Alafia River meets Hillsborough Bay, with U.S. 41 running through the middle. About 27 percent of homes here are mobile homes and roughly 17.7 percent of housing was built before 1980, so mildew can come from very different places on neighboring lots. In 2024 Hurricane Helene flooded most homes on Oak Street, a peninsula into the river that residents said had never flooded before.

What to do now

1. Measure the patch. If the growth is smaller than about 3 feet by 3 feet, EPA says you can usually clean it yourself.
2. Look for the water. Check the ceiling above the spot, the window frame beside it and, in a mobile home, the floor and skirting below. Mildew that sits low on a wall often has a wet subfloor or underbelly behind it.
3. Protect yourself. Gloves, goggles and an N-95 respirator, with a window open or a fan running.
4. Scrub, then dry. Detergent and water on hard surfaces, followed by a thorough dry. Never mix bleach with ammonia.
5. Let porous items go. Mildewed cushions, carpet pads and cardboard boxes that got wet usually can't be fully cleaned.
6. Watch for a return. Spots back within a few weeks mean the moisture source is still there.

What the spots usually mean

What drives the price

For a typical job, Angi lists most Tampa-area mold remediation between $1,347 and $3,778, with a bathroom cleanup usually $525 to $1,075. In Gibsonton, price moves with how far the growth spreads, whether drywall or flooring must come out, how much containment is needed and whether a mobile home's underbelly has to be opened. Repairs to plumbing, roofing or skirting are generally billed by other trades.