Mold remediation referrals for Tampa & nearby townsCall: (813) 437-5101
(813) 437-5101

Mold in Walls & Drywall in Pinellas Park, FL

moldremediationtampabay.net

More than half of Pinellas Park's homes predate 1980, and older walls are where slow leaks hide longest.

Stained or soft drywall in your Pinellas Park home?
Call now to be connected with a local mold remediation company in Pinellas Park.
(813) 437-5101

In Pinellas Park, most mold inside walls comes from slow leaks in older homes and manufactured homes: supply lines, drains, roof penetrations and AC condensate, plus any storm water that got in during Helene or Milton. The affected drywall or paneling has to be removed and the framing dried, not just cleaned on the surface. Call the number on this page to be connected with a local mold remediation company in Pinellas Park.

Opened wall showing mold on the back of drywall and on studs, mold in walls & drywall in Pinellas Park, FL

How the call works

Calling the number on this page connects you with an independent mold remediation company that takes jobs in Pinellas Park. Be ready to describe what you see, where the wall is in the house, and whether there's a known leak or a past storm involved. The company will set up a visit to check moisture levels along the wall and nearby floors, then give you a written scope. A solid scope names the containment method, how much drywall or paneling comes out, what happens to insulation, how the framing will be dried and how dryness is confirmed before the wall is closed. Testing, if you want it, is done by a separate assessor, because Florida law bars a remediator from assessing a structure it worked on within 12 months.

What sets the price

  • Size of the opening; Angi's Tampa-area range for wall remediation is $1,075 to $21,500
  • Labor time, which Angi puts at $75 to $120 an hour in the Tampa area
  • Rebuilding, which Angi lists separately at $1,075 to $3,125 for drywall
  • Manufactured-home paneling, which may cost more to match
  • Whether ductwork or an air handler is part of the moisture problem
Call now to be connected with a local mold remediation company in Pinellas Park.
(813) 437-5101
Technician cutting an inspection opening in drywall, mold in walls & drywall in Pinellas Park, FL

Local conditions

Pinellas Park is an inland city between St. Petersburg and Largo, and its housing skews older. The median home was built around 1978, roughly 57 percent of the stock predates 1980, and manufactured homes account for about 15 percent of units. About 31 percent of occupied homes are rented. Older copper or galvanized pipe inside walls, aging roofs and air handlers that run most of the year are typical sources. Pinellas County notes that everyone in the county lives in a flood zone of some level and that standard homeowners and renters policies usually don't cover flood. After Milton, the county urged residents of flooded homes to pull out wet contents quickly to prevent mold. The city runs its own building department on 78th Avenue North for repair permits, and the Neighborhood Services Department on 60th Street handles possible city code violations, including leaks a landlord won't fix. The Florida Department of Health in Pinellas County has a location in the city.

Prep checklist

  • Shut off or repair the leak if you can
  • Clear a path to the wall and the air handler closet
  • Keep pets and kids out of the room
  • Write down when you first noticed the stain or smell

Mold in Walls & Drywall questions in Pinellas Park

Why does the mold on my wall keep coming back?
Because the water source is still active, or the wall was cleaned on the surface while growth stayed inside. Look for the leak, condensation or humidity problem feeding it and have the damaged drywall removed instead of wiped.
Are mobile home walls handled differently?
The idea is the same, but the materials differ. Many manufactured homes use thin wall panels and have plumbing and ductwork under the floor, so a leak can wet the walls from below. Removal and replacement should follow the manufacturer's panel type.
Can I cut out a small patch of moldy drywall myself?
EPA says a homeowner can usually handle an area smaller than about 10 square feet once the moisture problem is fixed. Wear gloves, goggles and an N-95 respirator, bag the debris, and stop and call a remediation company if the growth continues inside the cavity.
What can a renter do about a wet or moldy wall the landlord won't fix?
Put the repair request to the landlord in writing with photos. If nothing is done, the City of Pinellas Park Neighborhood Services Department handles possible city code violations by phone or in person on 60th Street.

More mold services in Pinellas Park

Mold in Walls & Drywall nearby

Call now to be connected with a local mold remediation company in Pinellas Park.
(813) 437-5101

Last updated:

☎ Call (813) 437-5101